Josh0619
Super OPE Member
- Local time
- 11:32 PM
- User ID
- 2634
- Joined
- Feb 14, 2017
- Messages
- 206
- Reaction score
- 348
- Location
- Bagley mn
saw #1 runs , has tiny smear on the exhaust side of piston. Needs a throttle cable, exhaust shield for muffler and it needs the cylinder av mount With ground for the handle. Carb heater is also missing
Saw#2 does not run, case has been changed at some point, looks oem
Needs: piston, main bearings,av mount with ground connector for handle heat. This saw does have the carb heater. cylinder is good accept a tiny dent on bottom of intake port,which could very easily be blended.
$475 shipped in the lower 48 for the 2 pho
Saw#2 does not run, case has been changed at some point, looks oem
Needs: piston, main bearings,av mount with ground connector for handle heat. This saw does have the carb heater. cylinder is good accept a tiny dent on bottom of intake port,which could very easily be blended.
$475 shipped in the lower 48 for the 2 pho
Attachments
Last edited:
