WANTED 365sp top end, Crankshaft

[jacktheripper]

Need these for a project for a customer. Hoping to get this thing going soon.

 

[jacob j.]

I got a crank - I'll get you pictures tonight. No top end though.

 

[jacktheripper]

I got a crank - I'll get you pictures tonight. No top end though.

Awesome

 

[jimstihl]

Need these for a project for a customer. Hoping to get this thing going soon.

I have a parts saw and a spare jug but can’t get to the shop till this evening..

 

[jacktheripper]

I have a parts saw and a spare jug but can’t get to the shop till this evening..

Ok, just let me know!

 

[EFSM]

Ok, just let me know!

I have a couple top ends. I’d have to dig them out to see what shape they’re in.

 

[EFSM]

I have a couple top ends. I’d have to dig them out to see what shape they’re in.

Oops: I’ve got 50mm top ends, not 48. Are you needing 48?

 

[jacktheripper]

Oops: I’ve got 50mm top ends, not 48. Are you needing 48?

Sweet! 50MM is nice too. I’m sure he wouldn’t mind

 

[av8or3]

I have a new top end, open port. You interested?

 

[jacktheripper]

I have a new top end, open port. You interested?

I think I’d like to keep it CP for this one. The story is that this saw belongs to a friend of a friend who worked for the forest service for over a decade. He cleared trails and did fuels mitigation. When he started, they bought him this saw. He had thousands of hours on it, and it finally got all loose in the bottom end and scored up the top. When he left the FS, his boss told him to just grab his old saw from the junk pile and take it with him. Well it’s been sitting for years in his garage, and my good buddy secretly took it from him and brought it to me to rebuild as a surprise. I want to keep it as close to original as possible, so either a CP 48mm or CP 50mm would be best.

 

[Junk Meister]

I think I’d like to keep it CP for this one. The story is that this saw belongs to a friend of a friend who worked for the forest service for over a decade. He cleared trails and did fuels mitigation. When he started, they bought him this saw. He had thousands of hours on it, and it finally got all loose in the bottom end and scored up the top. When he left the FS, his boss told him to just grab his old saw from the junk pile and take it with him. Well it’s been sitting for years in his garage, and my good buddy secretly took it from him and brought it to me to rebuild as a surprise. I want to keep it as close to original as possible, so either a CP 48mm or CP 50mm would be best.

Keep us informed.
ALWAYS pleasant to hear about GOOD DEEDs.

 

[jacktheripper]

Any confirmation on cylinders from anyone?

 

[aarongd]

i got a super nice OEM Closed Port 365 piston and cylinder i would get rid of

 

[aarongd]

Oops: I’ve got 50mm top ends, not 48. Are you needing 48?

i would be interested in Closed Port 50MM top ends,. Looking for non XT

 

[EFSM]

i would be interested in Closed Port 50MM top ends,. Looking for non XT

Only have XT sorry.

 

[aarongd]

roger that thanks!!

 

[jacktheripper]

Still looking for a top end. Anybody?

 

[aarongd]

Pretty sure i told you i have a top end Closed Port 48MM piston and Cylinder

 

[jacktheripper]

Still shopping

 

[EFSM]

Just to be clear, this is not an xtorq, right?