FOUND IT 357 piston

[Josh0619]

looking for a 357 piston that will fit an 01 13mm rod

 

[chipper1]

@dustinwilt68

 

[Cracker Boy]

Arnt the meteors 13 mm pin check with @Definitive Dave. Or hls supply

 

[EvilRoySlade]

Good luck. 2 years ago I found one on eBay for $100. Meteors work but have a gap on either side of the rod. Never heard of a problem. You honestly are further ahead finding an updated crank 359 or 357 and putting that in place of yours.

 

[Cracker Boy]

Good luck. 2 years ago I found one on eBay for $100. Meteors work but have a gap on either side of the rod. Never heard of a problem. You honestly are further ahead finding an updated crank 359 or 357 and putting that in place of yours.

Thats way they are on 10 mm 044 piston too.dont know husky all that well.

 

[EvilRoySlade]

Well to be real honest, I’d just buy a new OEM P&C. They run about $130 shipped usually. Sell the cylinder you have if it’s decent, put that money towards a used crank.

 

[Josh0619]

I’m at the $ point where it’s not worth it to do the crank, it’s worth way more in parts. At the same time, I hate to see a 357 die

 

[EvilRoySlade]

Well, what do you have into it and what does it need? Are you flipping or is this your work saw?

 

[dustinwilt68]

I did know where 1 more was located, been a while, they had 2, I used 1. Will try and check within a few days, they are not cheap though, most shops know how rare they are to get.

 

[Josh0619]

I have 4 runners so I can use the parts. Just thought someone has to have an old piston laying around.

 

[Josh0619]

I did know where 1 more was located, been a while, they had 2, I used 1. Will try and check within a few days, they are not cheap though, most shops know how rare they are to get.

Parts tree says they have one online, $105!! For that I could change the crank and buy a meteor

 

[dustinwilt68]

Just because it says available doesn't mean it is, I have had that happen a few times w them

 

[Dub11]

I couldn't do the link thing but hit this guy up on eBay. He has lots of husky part.

 

[Josh0619]

I couldn't do the link thing but hit this guy up on eBay. He has lots of husky part. View attachment 102458

Thanks

 

[lehman live edge slab]

How much is a complete 357 worth? Guy at work has one was running but been sitting on a shelf with broken brake flag. How do you know if it’s the early or late model? I’m not up on huskies yet still learning. He was hinting at 300$ but I saw it and it definitely had some use.

 

[mdavlee]

If it runs and needs only the flag then $300 is fair. Not a smoking deal. Get The numbers off the tag and it gives the build date

 

[lehman live edge slab]

Ok I’ll talk to him, he asked if I wanted it and I thought about some and ended up buying all the other stuff he wanted rid of. Got a 264 Olympik, mini Mac 110, mac 15 and an 025 for 100$. The 264 runs great

 

[lehman live edge slab]

Well I’ll get numbers and see what I can buy it for. More then likely it would end up on here for what I got it for just to pass it on and save it from the buys shed. Hasn’t run in a long time and not nicest when he hinted at 300 I told him I was thinking 200$. Next day he told me that maybe i was closer at 200

 

[Josh0619]

Well I’ll get numbers and see what I can buy it for. More then likely it would end up on here for what I got it for just to pass it on and save it from the buys shed. Hasn’t run in a long time and not nicest when he hinted at 300 I told him I was thinking 200$. Next day he told me that maybe i was closer at 200

All depends on condition, pictures will tell a lot

 

[lwhaples]

If you decide you want new. This one will fit your saw.