WANTED 3/8” .058” 110DL

[davidwyby]

Whatcha got?

 

[Shane¹]

I have some .58 chain but all 72 loops I could put together a couple but leaves an odd amount left over do you have a breaker spinner?

 

[MG2186]

Whatcha got?

I can spin you loop of full comp EXL. $.25/DL

 

[davidwyby]

I have a mess of oregon chain, I'd prefer husky or stihl. OK with used, and I can break/spin.

 

[Shane¹]

I can spin you loop of full comp EXL. $.25/DL

That's a good price

 

[davidwyby]

That's a good price

yeah....

 

[Shane¹]

I have some husky c85 I picked up on eBay it was 84dl I made it all 72dl though you can sometimes find it on there in 6 or 10 box lots with make an offer and get some good prices. I also have some .58 semi chisel I got from Steve the boat guy before he passed. Send me a message if you want and I can send you some pictures of what I got

 

[davidwyby]

Still looking...skip. Maybe I should just open the bar up to run .063".

 

[Shane¹]

Still looking...skip. Maybe I should just open the bar up to run .063".

Looking for skip? Full or semi chisel?

 

[davidwyby]

Looking for skip? Full or semi chisel?

Both?

 

[Shane¹]

Don't have any skip in .058 someone must have some

 

[Lnk]

I think that is the same dl for my Husqvarna 36" .058 bar. I will check if I have a spare loop.

 

[Woodslasher]

Still looking...skip. Maybe I should just open the bar up to run .063".

Yes, easy and it'll make your life a lot easier. I'm working on making 99% of my bars .063 for simplicity's sake. The one exception in my 24" D009 mount .050 bar that I have 20 or so chains for.

 

[Wilhelm]

Still looking...skip. Maybe I should just open the bar up to run .063".

Husqvarna 20'' X-CUT Skip Tooth Chain C83S 3/8'', .050''

www.hlsproparts.com

Sale price at time of posting, may not last!

Get 2, break & spin.
.008" narrower DL don't matter nothing, I am running .050" chains in old .058" bars.

I can get .058" X-Cut locally, but only full complement.

 

[Wilhelm]

I think that is the same dl for my Husqvarna 36" .058 bar. I will check if I have a spare loop.

My D009 true 36" bar takes 115DL.

Scratching my head what bar takes 110DL.

 

[Lnk]

My D009 true 36" bar takes 115DL.

Scratching my head what bar takes 110DL.

Yup, mine too. Sorry David!

 

[davidwyby]

Oregon 33RWDD009

33” Oregon LW bar came with one chain. Don’t see DL count online. Instead of counting all the links I compared to a 32” 105DL and a 36” 115DL. I came up with 110 DL. Sound right? Thanks

opeforum.com

 

[davidwyby]

got some full comp. Chokes on chips sometimes so still looking for skip.

 

[Traprunner]

Baileys has c85s chain on sale. A roll is $299.99

 

[bogieboy]

My D009 true 36" bar takes 115DL.

Scratching my head what bar takes 110DL.

Larger profile 32" bars usually...like this Mac bar i modified and installed on my ms661(dont mind how slow the saw was cutting in that vid, was the first real cutting it had done on a fresh top end rebuild, thats only the second tank of fuel, it has since gotten much stronger)