SELLING 28 inch bar 3/8 x .058

[radio]

I have a few new Oregon 28" power match bars 3/8 pitch, .058 gauge, 92 drive links.

$49. I will split the shipping charge.



I have chain in .058 if you need any - LPX, MLPX (Duracut, heavy chrome plating), LGX and JGX (skip version of LGX).

Pulled this from another site, fits the following chainsaws:

• Dolmar PS-6400, PS-7300, PS-7900, PS-9000, PS-9010FL
• Efco 181 (Newer Models from Aug 2007+), MT 7200, MT 8200
• Husqvarna 61, 65, 66, 70, 77, 160, 162, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 Lite, 298, 365, 371, 372, 380, 385, 390, 394, 395, 480, 570, 575, 576, 1100, 2100, 2101, 3120, Jungle 3120
• Jonsered 625, 630, 630 SUPER, 630 WEST COAST, 670, 670 WEST COAST, 2065, 2071, 2077, 2083, 2094, 2095, 2163, 2165, 2171, 2186, RIPPING MILL
• Makita DCS 6401, DCS 6800, DCS 7301, DCS 7901, DCS 9000, DCS 9010FL
• Partner 550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
• Poulan PRO 415, 425, 445, 475, 505
• Shindaiwa (SDK) 550, 575, 577, 680, 695, 757
• Solo 603, 662, 665, 667, 670, 675, 680, 681, 690, 694

 

[Marshy]

I have a few new Oregon 28" power match bars 3/8 pitch, .058 gauge, 92 drive links.

$49 plus $10 shipping to lower 48, send PM for quote to other areas.

View attachment 188128View attachment 188129

I have chain in .058 if you need any - LPX, MLPX (Duracut, heavy chrome plating), LGX and JGX (skip version of LGX).

Pulled this from another site, fits the following chainsaws:

• Dolmar PS-6400, PS-7300, PS-7900, PS-9000, PS-9010FL
• Efco 181 (Newer Models from Aug 2007+), MT 7200, MT 8200
• Husqvarna 61, 65, 66, 70, 77, 160, 162, 181, 185, 260, 266, 268, 272, 281, 285, 288, 288 Lite, 298, 365, 371, 372, 380, 385, 390, 394, 395, 480, 570, 575, 576, 1100, 2100, 2101, 3120, Jungle 3120
• Jonsered 625, 630, 630 SUPER, 630 WEST COAST, 670, 670 WEST COAST, 2065, 2071, 2077, 2083, 2094, 2095, 2163, 2165, 2171, 2186, RIPPING MILL
• Makita DCS 6401, DCS 6800, DCS 7301, DCS 7901, DCS 9000, DCS 9010FL
• Partner 550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
• Poulan PRO 415, 425, 445, 475, 505
• Shindaiwa (SDK) 550, 575, 577, 680, 695, 757
• Solo 603, 662, 665, 667, 670, 675, 680, 681, 690, 694

What's the one on the far right?

 

[radio]

What's the one on the far right?

A 34" .063 Reduced Weight in Stihl mount. I have a few of those coming this weekend.

 

[radio]

Still have some bars available.

 

[Wolverine]

Wish these were .050! I could use a 28, just don't want and odd ball gauge.