WANTED 268XP Piston

[CJ Brown]

Looking for a good 50mm windowed piston for my 268xp. Good/new oem or new Meteor sized 'A' or 'AB'

Thanks,
Chris

 

[CJ Brown]

Still looking.

 

[Agent Smith]

Not sure how much you're looking to spend but there's these

https://www.ebay.com/itm/265038045514

https://www.ebay.com/itm/171851831174

 

[CJ Brown]

Not sure how much you're looking to spend but there's these

https://www.ebay.com/itm/265038045514

https://www.ebay.com/itm/171851831174

Thanks for the links. The oem would nice but it would be $160cdn by the time I got it in my hand. And the meteor is a "B' sized piston and I have messaged the seller previously and he doesn't have any 'A' sized ones.

 

[mgr1]

https://www.dlastore.com/e_store/pi...-266-xp-268-special-50mm-501659403.html?amp=1

Maybe a cheaper route.

 

[CJ Brown]

https://www.dlastore.com/e_store/pi...-266-xp-268-special-50mm-501659403.html?amp=1

Maybe a cheaper route.

Thanks for the link. I have never been to that site before. I see it is located in Greece - is this dandrikop from ebay? I did contact him and he only has 'B' pistons in stock. I will send a message to this DLA store and see what he has.

 

[mgr1]

Thats the Same Guy.

 

[mgr1]

What about the Dukes moly coated piston?

 

[CJ Brown]

What about the Dukes moly coated piston?

I have looked at them and I think I will try one at some point, but not in this particular saw. I will likely put one in a 262xp eventually.

 

[mgr1]

There is a place near me that supply meteor pistons.
I can ask if they can get a A seize and if they can ship it to You.

 

[CJ Brown]

There is a place near me that supply meteor pistons.
I can ask if they can get a A seize and if they can ship it to You.

That would be great if you don't mind. Thanks

 

[mgr1]

Let You know when i have news.

 

[dustinwilt68]

I have ran plenty of the B pistons in A cylinders, never an issue.

 

[CJ Brown]

I have ran plenty of the B pistons in A cylinders, never an issue.

That is some really useful info. I have been wondering if that was the case but have never tried it and don't want to mess up this cylinder. If an 'A' piston doesn't materialize I will just get a 'B' piston and be done with it. Thanks for chiming in!