262

[Cut4fun]

Ported and Can hear it go lean in test cuts with loose cylinder LOL

 

[cgraham1]

What's your point? We all know you hate the 262.

 

[exSW]

HTF do I reset this spring in order to pin the linkage and reattach the flag?

 

[Cut4fun]

What's your point? We all know you hate the 262.

Point is I raced that one. I know the 262 saws too, stock to ported. Not what you think they are IMO.

Sorry those saws are for selling to the cult like followers like yourself. Just want to say thanks for buying them.

 

[jacob j.]

HTF do I reset this spring in order to pin the linkage and reattach the flag?

I usually take the cover off, pop the spring out, install the linkage pin, pop the spring back in, put the cover back on, and install the brake flag.

 

[Tractorsaw1]

I always meant to go back in Randy's 262 day thread & see what the difference was for the poulan. Was it like 2 minutes slower per cut or 2 seconds?

 

[exSW]

I usually take the cover off, pop the spring out, install the linkage pin, pop the spring back in, put the cover back on, and install the brake flag.

Hmmm,I just was told how to build and use a tool to reset it together.
Btw did that jug work for you?

 

[the GOAT]

HTF do I reset this spring in order to pin the linkage and reattach the flag?
View attachment 406

Before linkbucks there was a really good tutorial on how to put those back together.

 

[exSW]

I usually take the cover off, pop the spring out, install the linkage pin, pop the spring back in, put the cover back on, and install the brake flag.

Weren't no popping that spring

 

[cgraham1]

Those brake springs is always a pain in the ass. I'm sure there's a trick to it, but I don't know it.

 

[exSW]

I dang near got it with a Metabo wrench. I got to make a tool about an eighth smaller between the pins.

 

[skippy]

One of my favorites . the ported one puts a grin on my face

 

[drf256]

That's one fast saw.

 

[Moparmyway]

That's one fast saw.

Welcome Doc, good seeing you here

 

[drf256]

Great to be here

 

[skippy]

Great to be here

Sorry buddy wasn't my intention to upset you

 

[Tractorsaw1]

Would be nice to see an aftermarket side cover with side chain tensioner for these saws. Anyone modded that into 1 of the aluminum side covers? Kicking around picking up another saw, might keep, might sell.

 

[drf256]

Ported and Can hear it go lean in test cuts with loose cylinder LOL

Any specs you'd like to share on that 262?

Damn that's one sick saw.

 

[skippy]

Cut4 fun that saw looks like its alot of fun

 

[Cut4fun]

Cut4 fun that saw looks like its alot of fun

A STS competitor raced it in sweet-gum in 4ci class at Alabama event and got 2nd with it.

Adam on CRS did alot of the machine work etc on it. I just bought it as a runner. It really liked 30% nitro but I ran %15.