psuiewalsh
Basement Bodging
- Local time
- 12:26 AM
- User ID
- 124
- Joined
- Dec 23, 2015
- Messages
- 1,867
- Reaction score
- 5,537
- Location
- Nottingham,pa
![United-States Country flag](https://opeforum.com/data/files/flags/shiny/32/United-States.png)
![IMG_20160220_104301.jpg IMG_20160220_104301.jpg](https://opeforum.com/data/attachments/12/12518-85e6c3aaac6ba7f42d49c60b2f5cc724.jpg)
![IMG_20160221_130935.jpg IMG_20160221_130935.jpg](https://opeforum.com/data/attachments/12/12520-da283626ee0f895ba031f9ea5fee8d42.jpg)
![IMG_20160221_131439.jpg IMG_20160221_131439.jpg](https://opeforum.com/data/attachments/12/12521-e7f00fe0f9d812d7bbea4d5103a1d5da.jpg)
![IMG_20160223_163834.jpg IMG_20160223_163834.jpg](https://opeforum.com/data/attachments/12/12522-ce27bca12803b07374a159d1464354c6.jpg)
![IMG_20160223_163908.jpg IMG_20160223_163908.jpg](https://opeforum.com/data/attachments/12/12523-68089f7fcfdfc6b73b587b8a7391b430.jpg)
I replaced the piston with a good used one. New piston ring. The cylinder was polished to remove transfer. New echo fuel line. New oem fuel cap washer. Saw is around 200psi after 3 tanks of fuel. The plastic clutch cover goes with the saw as well as the metal chain brake cover. Looks like someone was running a bow bar based on the material removed from the plastic cover and saw case.
Last edited: