FOUND IT 14mm stihl bar, 28" - 32"

[JimG.]

Looking for an inexpensive bar option in 404 or 3/8 to hang off an old Stihl 051 I just got going. Around 32" or close to it. hard nose or sprocket.

 

[Woodslasher]

Looking for an inexpensive bar option in 404 or 3/8 to hang off an old Stihl 051 I just got going. Around 32" or close to it. hard nose or sprocket.

I've got a 36" Windsor bar with 2 new and 1 very lightly used loops of Stihl 3/8 chisel chain I'd cut loose, if you're interested I can get pics this weekend.

 

[JimG.]

Thanks for the offer. I thought about it and I believe 36" might be just a little much for this old hog. I'm gonna go 28" to 32".

 

[Maintenance Chief]

To my knowledge there aren't any 28-32" current offerings for 14mm ?
I did take a 32" 12mm and file out the slot for 14mm and channel the oil hole to work for my 088 stihl.

 

[JimG.]

Nearly picked up a 28 but it turned out to be 3003 pattern. I could but would rather not grind the slot and oiler.
I was hoping someone might have an old 3002 gathering dust in their spare bars collection.
There's a 30" carlton on ebay. I'll give you guys the weekend to rummage through your stuff before I order.

 

[av8or3]

I might have one. Will dig around.
I know I have a nos Oregon in .063 .404 x 32” long.

 

[av8or3]

Here’s what you want! Old school Duramatic that was made for that saw.
30”
Im almost certain this is the older style hardnose folks prefer. Fat bar with a huge radius on the nose. This one’s in good shape too. You won’t be wearing this one out. Just lmk.

 

[JimG.]

Looking good, sir. Pm sent.

 

[av8or3]

It almost needs dressing. I almost dressed it . Lol