Wisconsin Welder
Super OPE Member
- Local time
- 6:54 PM
- User ID
- 7982
- Joined
- Nov 28, 2018
- Messages
- 284
- Reaction score
- 750
- Location
- S.E. Wisconsin
064 for parts. I bought this about a month ago hoping it was a runner that I could use while I finished building an 066. There is too much going on with this thing, I do not have the time to get it where it needs to be. Long story short, I'm just too busy and pissed off about the situation to rebuild this right now, I am selling this "as-is" for parts.
Look at the pictures closely, I am trying to describe this accurately, here is what I know is wrong.
Cylinder bolt hole in PTO side, front, was really wallowed out, it is a 1/4"-20 now.
The muffler was dented up pretty bad and rusted thin in some places, it got scrapped.
It has a Farmertech coil on it, OEM coil was DOA when I got it.
Flywheel has a broken fin and a scratch around the O.D. looks like something got stuck between it and the coil.
Case has a dent in the front, shown in photos.
Case gasket leaks under muffler once it warms up.
Stripped bolt holes on lower right muffler mount, left rear mount for cover, other threaded. holes in case are in rough shape. The bar studs were pretty rough when I got it, I put new ones in, the threaded holes for those are starting to get wallowed out.
Handle has a weld repair that seems solid, there is hardware missing here and there.
It has a new meteor piston w/caber rings in it, the original has dent around the OD at the top like it ate something at some point.
$300 Shipped
Text me at 262-327-0018
Look at the pictures closely, I am trying to describe this accurately, here is what I know is wrong.
Cylinder bolt hole in PTO side, front, was really wallowed out, it is a 1/4"-20 now.
The muffler was dented up pretty bad and rusted thin in some places, it got scrapped.
It has a Farmertech coil on it, OEM coil was DOA when I got it.
Flywheel has a broken fin and a scratch around the O.D. looks like something got stuck between it and the coil.
Case has a dent in the front, shown in photos.
Case gasket leaks under muffler once it warms up.
Stripped bolt holes on lower right muffler mount, left rear mount for cover, other threaded. holes in case are in rough shape. The bar studs were pretty rough when I got it, I put new ones in, the threaded holes for those are starting to get wallowed out.
Handle has a weld repair that seems solid, there is hardware missing here and there.
It has a new meteor piston w/caber rings in it, the original has dent around the OD at the top like it ate something at some point.
$300 Shipped
Text me at 262-327-0018
Attachments
Last edited:
