SOLD 044/046 hybrid

[lehman live edge slab]

I’m going to sell my 044/046 hybrid I built but not really sure what to ask so going to start at 550$. Built this awhile back out of a blown low hour 044 Arctic i got from a neighbor. It was built with a new meteor piston and caber rings, the 046 top end is a d chamber if I remember correctly and it has the intake and exhaust cleaned up but not changed. The lower transfers are cleaned up and opened slightly, recently it started to idle high so I put new oem crank seals in last week so should be ready to go. Runs and cuts well as is or buy it and ship off to someone to fully port it. Heated grips work well pho plus shipping 550$ OBO. Probably has 2 gallons of 40:1 through it since I built it. Base deleted and timing advance also squish is right around 21 thousandths

 

[lehman live edge slab]

couple cylinder/piston pics, first time the mufflers been off since I put it together. Has light scuffing on piston skirt for some reason but runs great with lots of compression. Oh also has zama c3m carb and standard flocked filter no hd. Also even though the piston looks like it’s scuffed lightly you can’t feel anything at all with a finger nail

 

[Ryan Browne]

Pm incoming

 

[lehman live edge slab]

Pending

 

[hseII]

Pending

Live Action!


Sent from my iPhone using Tapatalk Pro

 

[Wonkydonkey]

And it could end very soon .
I think the winner will be happy

I know would be happy as Things like this never come up here. Well it would cost a lot more even if it did..

I keep looking out for cranks an pots for my 10mm ....to hybrid it

 

[lehman live edge slab]

I have some cranks and at least one cylinder I think

 

[lehman live edge slab]

I have 10mm cranks 2 of them misunderstood you need to finish reading

 

[Johnmn]

Pm incoming

How many 044/440's do you need?!?!?

 

[lehman live edge slab]

I decided to buy a ms462 today after work, don’t have any newer big saws and no mtronic of my own until now. Wanted a 500i and tried to order one but they’re so far behind that I can’t even get on a waiting list. Doesn’t sound like it’s going to get better anytime soon so decided to get a 462 before it’s unobtanium just like the 500

 

[Ryan Browne]

How many 044/440's do you need?!?!?

A good friend who I do some tree work with sometimes is looking for a saw this size.

 

[Wonkydonkey]

I have 10mm cranks 2 of them misunderstood you need to finish reading

yeh I need a 12mm crank and a 460 slug & jug .. but ... I’m in the uk and shipping and taxes would be a killer

 

[Flying_Dutchman]

How many 044/440's do you need?!?!?

[emoji1787] all of them

Sent from my moto g(7) power using Tapatalk