FOUND IT 041 AV crankcase

[Mark71gtx]

Looking for a crankcase that hasn't had the threads pulled out of the cylinder mounting holes and no chunks missing from it. I think the standard AV crankcase will work, but the saw is a Super if it matters.

 

[brushwacker]

LI think the standard AV crankcase will work, but the saw is a Super if it matters.

That I don't know. If it doesn't matter I think I have a bottom end with good cases . I'll take a look if that will work for you, just let me know when you confirm what you need if you still need it.

 

[Definitive Dave]

I believe I have a new old stock crank case still in the box

 

[Mark71gtx]

@brushwacker Looking a the IPL, no different crankcase was listed as long as it was an AV. @Definitive Dave Thanks man, but this saw is not worthy of the new crankcase. It has some owner customizations on it. I couldn't bring myself to put a NOS case on this one.

 

[how57]

Looking for a crankcase that hasn't had the threads pulled out of the cylinder mounting holes and no chunks missing from it. I think the standard AV crankcase will work, but the saw is a Super if it matters.

I've got one maybe two, but won't be home till the 27th. If you don't find one by then let me know.

 

[dustinwilt68]

I have 2 new air filter covers I believe.

 

[how57]

I have 2 new air filter covers I believe.

What would you have to have for one air filter cover and the started cover you have listed?

 

[dustinwilt68]

Sorry only have the starter cover for the 041, the air filter covers are 048, take 20.00 plus shipping on the starter cover.

 

[how57]

Sorry only have the starter cover for the 041, the air filter covers are 048, take 20.00 plus shipping on the starter cover.

Ok. What's the shipping? Zip is 96094

 

[dustinwilt68]

$8.00

 

[brushwacker]

I don't remember the history of this, tiny paint chips and slightly more then little paint rubbed of here and there looks to be the worse of it. Actually the bearings and crankshaft assy feel and look good far as I can tell. The piston has a gouge. I don't think it has a lot of hours. I know your looking for the case or cases but I want to sell all there is there as a unit or perhaps if you don't want the oil pump assy I have a saw that will need 1 when I get to it.

 

[brushwacker]

I am pretty sure it was off an AV, not sure of the difference though myself. Maybe where the handle bar attaches ?
How does $35. with the oiler assy or I'll take the oiler parts off and let it go for $20 (price + shipping)

 

[how57]

I don't remember the history of this, tiny paint chips and slightly more then little paint rubbed of here and there looks to be the worse of it. Actually the bearings and crankshaft assy feel and look good far as I can tell. The piston has a gouge. I don't think it has a lot of hours. I know your looking for the case or cases but I want to sell all there is there as a unit or perhaps if you don't want the oil pump assy I have a saw that will need 1 when I get to it.

Pretty clean overall. It appears to be a great start. I have a 041 Super p&c if need.

 

[Mark71gtx]

Pull your oiler parts that you need. I'll take it. PM incoming.

 

[brushwacker]

Pull your oiler parts that you need. I'll take it. PM incoming.

Will do, should have it package,weighed,etc later in the evening, tomorrow.

 

[how57]

I believe I have a new old stock crank case still in the box

What would you want for that?