FOUND IT 038 Magnum, 288xp

[jacktheripper]

I have obtained the 034 super, the 044, and a nice 266, so these are the next two stops on my saw aquisition journey.

I would hold out for a very clean example of either of these, but let me know what you have! I would consider trading towards either of these also.

 

[HumBurner]

I have obtained the 034 super, the 044, and a nice 266, so these are the next two stops on my saw aquisition journey.

I would hold out for a very clean example of either of these, but let me know what you have! I would consider trading towards either of these also.

Stihl 038 Magnum II 25" Bar & Chain - farm & garden - by owner - sale - craigslist

Low hours of usage, still has most of the plastic on the top emblem. West German made, serial #120755713. 72.2 CC professional grade saw legendary for power and endurance. Rare factory triple port...

mendocino.craigslist.org

Not my saw, not someone I know. They rebuild and sell stihls often, have seen their ads for years. Dunno if they'll ship.

Pricey, but clean, and a Mag2!


You can get Brazil 288s brand new, also MS 381/382, which is basically an 038.

 

[cuinrearview]

@cus_deluxe

 

[Czed]

I have obtained the 034 super, the 044, and a nice 266, so these are the next two stops on my saw aquisition journey.

I would hold out for a very clean example of either of these, but let me know what you have! I would consider trading towards either of these also.

Nightrouge still has new brazil 288s

N

SELLING Post in thread 'NIB/NOS Saws Husky 353, 61, 372 OE, 288 - Stihl ms361, ms381/382, ms660, ms070/720 - Echo cs1201'

Sep 3, 2024

Do you have anymore of these?

Sorry all gone

• NightRogue

• 

 

[jacob j.]

@how57 has an 038 for sale that looks pretty good.

 

[Woodwackr]

Stihl 038 Magnum II 25" Bar & Chain - farm & garden - by owner - sale - craigslist

Low hours of usage, still has most of the plastic on the top emblem. West German made, serial #120755713. 72.2 CC professional grade saw legendary for power and endurance. Rare factory triple port...

mendocino.craigslist.org

Not my saw, not someone I know. They rebuild and sell stihls often, have seen their ads for years. Dunno if they'll ship.

Pricey, but clean, and a Mag2!


You can get Brazil 288s brand new, also MS 381/382, which is basically an 038.

Dang, that really over priced, even with the 3-port muffler.
I recently sold my Brazil mag2 for $375

 

[HumBurner]

Dang, that really over priced, even with the 3-port muffler.
I recently sold my Brazil mag2 for $375

This person usually has higher prices, but they sell. My guess is they do good work, as I've seen them selling for years. Again, I have no idea who the seller is. Boonville is way the hell off the beaten path, and I live on the edge of the middle of nowhere, as it is, so that's saying something.

 

[cus_deluxe]

I have obtained the 034 super, the 044, and a nice 266, so these are the next two stops on my saw aquisition journey.

I would hold out for a very clean example of either of these, but let me know what you have! I would consider trading towards either of these also.

i have a 288 listed on here, check it out!

 

[cus_deluxe]

SELLING Thread '288'

Aug 5, 2024

i got this as just the crankcase and fuel tank and misc bits. looked to be extremely low use, but case had sat open and crank bearings were crunchy so i split and replaced bearings, seals, gaskets. its been a year or so, i THINK i used oem seals but i honestly cant remember. good quality main bearings and oem gaskets.
new oem carb
new oem 54mm top end
new oem chain brake assembly
mattyo top cover
hls filter
starter is ratty, muffler is ratty, aside from those two items its mostly a near new saw. i ran two tanks through it last...

• cus_deluxe
• Replies: 20
• Forum: Whole Chainsaws for Sale/Trade

• 

 

[HumBurner]

Good deal!

 

[jacktheripper]

Well I grabbed @how57's 038 magnum with aftermarket short block. I think I will try to find an oem shortblock for it. Anyone have an oem 038 magnum case/crank/cylinder hanging around?

As for the 288, I might have a line on a project one. We'll see...

 

[Woodwackr]

Well I grabbed @how57's 038 magnum with aftermarket short block. I think I will try to find an oem shortblock for it. Anyone have an oem 038 magnum case/crank/cylinder hanging around?

As for the 288, I might have a line on a project one. We'll see...

SELLING Post in thread '028 and 038 parts'

Jun 29, 2024

I recently picked up a big used parts lot and wound up with 038, 028 stuff I have no need for.
Many misc cover plastics, starters, cases, cylinders including super and magnum. I’m still going through it so let me know what you need…might have it

Open to trades as well for clutch covers for 044, 066

View attachment 424335View attachment 424336View attachment 424337View attachment 424338View attachment 424339

mostly complete saw...

• Woodwackr

more 038 stuff in a bin