FOUND IT 026 Piston

[jacktheripper]

Anyone have one? Figured I’d ask before I press the button on a Meteor.

 

[59billy]

You've probably already seen this one, but just in case:

Pardon Our Interruption...

 

[Sloughfoot]

I've got a used oem in good shape with ~.045 off the crown that I may be replacing with a .010 taller meteor midweek.
New Caber rings, original bearing, wristpin and clips.

 

[Stump Shot]

Anyone have one? Figured I’d ask before I press the button on a Meteor.

I have a new old stock Tecomec, can't remember the bore diameter though. What size do you need?

 

[Stump Shot]

Anyone have one? Figured I’d ask before I press the button on a Meteor.

I pulled one from my stash and it's the 44mm version, there also was a 44.7mm piston for the 026 and 260.

 

[drf256]

I’ve got >25 44.7 new oem slugs. As for the 44mm, only used.

 

[lehman live edge slab]

I pulled one from my stash and it's the 44mm version, there also was a 44.7mm piston for the 026 and 260.

If it’s an 026 and all original should be 44, the 44.7mm happend into the ms 260 version some are 44 and some 44.7.

 

[jacktheripper]

The piston/cyl is a 44mm. I spoke with @Stump Shot yesterday and I’m snagging a Tecomec kit from him. Thanks @drf256 and @lehman live edge slab

 

[lehman live edge slab]

The piston/cyl is a 44mm. I spoke with @Stump Shot yesterday and I’m snagging a Tecomec kit from him. Thanks @drf256 and @lehman live edge slab[/
[/QUOTE]
I used a 036 techomec kit once just because it was so cheap on eBay as a clearance. Honestly was a very nice cylinder and has held up many years, sold the saw to a guy i work with for a cheap price him knowing it was and aftermarket kit. Things been cutting his firewood and bigger trees for 10 years, uses his 261 on smaller stuff.

 

[Stump Shot]

The piston/cyl is a 44mm. I spoke with @Stump Shot yesterday and I’m snagging a Tecomec kit from him. Thanks @drf256 and @lehman live edge slab

It's on the way...