High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

372xp

  1. B

    WANTED Husqvarna 372

    Happy new year everyone! I’m looking to test the waters and see if anyone may have a non running, but buildable 372xp. I would like a whole power head, but at the same time if the majority is there I would consider that also. This doesn’t have to win any beauty contest I’m just now getting into...
  2. P

    SELLING 2018 Husqvarna 372xp

    Bought this saw new in 2019. I bet it only has 25+/- tanks through it...spent more time on the shelf than in the wood. Only ever run on 32:1 motul 800 2t synthetic w/ ethanol free 91 octane. Bottom of the saw still has the oem stickers....this thing is cherry. Only issue is the throttle lock...
  3. jacob j.

    SOLD Husqvarna 372 OE

    Hi Guys - I'm letting loose of a few saws I don't have time or room for - First up is a Husky 372 OE that I rebuilt a couple years ago. I split the case and installed new Nachi bearings and OEM seals + gaskets. I used a new OEM top end (71cc) that I got from a member here who is a dealer (it...
  4. M

    WANTED Husqvarna 372xp - new or immaculate

    Hi there, I've just missed out on a really nice 372xp over here, which I'm *s-wordty about as I've been trying to get hold of one for about 4 years. So I figured I'd see if you guys can send one over to me. Needs to be non xtorq. Powerhead only preferred just due to shipping really. Only...
  5. quattro90

    SOLD Jonsered 2065

    FS: Extremely low hour 1997 Jonsered 2065. All OEM no modifications. Has a standard 7pin PowerMate sprocket, pre-1998 EPA Zama C3M-2B carb, single felling spike, OEM muffler in perfect condition. This is a large mount saw and has the front chain tensioner which can easily be swapped to a side...
  6. WoodsliverDan

    SOLD 372xp OE

    2000 model year 372xp. I went through this saw top to bottom. 100% OEM saw. New rings while I had apart. Bearings are good. Full wrap and big dogs. New air filter, spark plug, top filter cover, bar studs, rim sprocket . Muffler modded the original exit hole. Blended lower transfer while jug was...
  7. quattro90

    SOLD Husqvarna 372XP XT

    Updated: 2014 Husqvarna 372XP XT. Starts and runs missing choke lever. Missing a few screws (1x on top cover & 1x on muffler bracket). Compression is ~140psi cold, the piston is worn, but isn't scored. This saw will make someone a great work saw or backup saw with a bit of minor maintenance. New...
  8. quattro90

    SOLD Husqvarna 372XP(W) OE

    Husqvarna 372XP OE converted to XPW (75cc) using brand new OEM Mahle P/C. Gasket delete and front ported muffler with full wrap bars and west coast spikes SEM unlimited (black) coil. $575 shipped in the ConUS unless in PST (contact me directly for exact shipping quote. PM if you have any...
  9. XP_Slinger

    SOLD Ported 372 X-Torq P&C

    Ported (by me) OEM 372XT piston and cylinder with intake boot. Nothing wrong with it 180psi when pulled, swapped out for a 75cc top end. Runs strong, cuts as fast as a stock 288 in 20" hard maple. This was a BG delete build so you can get more out of it with a cut base and chamber. Asking...
  10. jacob j.

    SOLD A couple of Husqvarnas...395XP and 75cc 372XP...

    Hey guys- I'm going to start moving some saws here. First up I have a nice pair- a 75cc 372 and a 395XP, both freshly rebuilt just before Christmas. The 372 is one I got as a project from a smashed saw. I bought the carcass locally and a lot of the parts came from buys from members here...
  11. Crzybowhntr

    What`s not to like about the 372xp? X-Torq and Non

    Just curious b/c if my ms460 sells, my non x-torq 372 will be the largest saw I have. Seems like a great saw with an extensive amount of parts availability.
  12. BonScott46

    Ebay Meteor 50mm Husqvarna 372 cylinder kit

    Came across this Meteor 50mm 372 cylinder kit on ebay. Seems like a low price and the color looks darker than the other Meteor kits I have seen, only pictures as I have not handled one myself. Wondering if anyone can shed some light on this...
  13. BonScott46

    Help with cylinder ID

    Does anybody recognize these types of cylinders? I am mainly interested in the top two cylinders. Pretty sure the one on the left is a 272xp and the one on the right is a 371(2)xp. The OEM pictures that come up for a 272 seem to have one less fin but I am no expert so I was hoping to get some...
Top