ZERO's latest activity
-
+ $500 in duties 🤪 -
You guys are crazy. You can’t even buy a new one of these now for under $1000 shipped to the states.
-
There is a black rubber thingamajig at the pump outlet check for crack or clog. I’m with EFSM on the vent. Just replace. Or prove it by...
-
I looked at a couple different IPL's and the do not show any sort of ring inside the connector (boot). The connector itself appears to...
-
I will give Schaeffer's credit for selling cheap. I'd pass on the boat oil though.
-
$11.49 per quart, $40.95 per gallon.
-
Glad you asked this. What one looks for is as follows. Ideally you want zero deposits on the piston skirt and specially the ring lands...
-
After Techron soak Prior to Techron soak. As you can see the Techron didnt do anything despite soaking for multiple days just as I...
-
Based on @lilspenny comment that Chevron Techron removes carbon from pistons I decided to give it a go. I will say I was very skeptical...
-
Whats Shaeffers go for per qt?
-
I ran the crap out of that stuff when I snowmobiles. Its great stuff and my RAVE valves never fouled. I also never had the piston/ring...
-
Dang, thats mighty cheap for a full synthetic everything oil. Ill grab a few gallons of it.
-
Fixed my stripped threads with a borrowed Time-Sert kit yesterday. Slicker than greased goose sh1t. Might just buy my own kit one of...
-
Just a word of warning, never tighten muffler bolts when the saw is warm. When installing a new gasket or muffler run a few heat cycles...
-
It’s just oxidation - affects the very surface. That’s why TIG welding can take steel to a molten state and if you keep the shielding...
