ZERO's latest activity
-
What type of surface? Anything specific, or any surface? -
I believe that HF has moved from the Bauer line to the Hercules, the last drum(s) I picked up were Hercules and they seem to work O.K...
-
Thank you for providing links. I have seen some of the Turnbull work having interest in both SASS and NCOWS and done a few small pieces...
-
Thanks. I’m not promoting or disparaging HF: I just recall that from an earlier post (somewhere), and it seemed to fit the discussion...
-
Surface preparation tool from Harbor Freight. Mark
-
You have a specific, bar polishing tool, as I recall? Philbert
-
The coloring is certainly attractive, and now is done mainly as decoration, but casehardening was originally used to harden the outer...
-
The temper colors (yellow, straw, brown, purple, blue) are oxidation and as such polish off very easily as Philbert has pointed out...
-
Interesting👍 I always thought of color case hardening as decorative in nature as relatively low heat surface and not structural...
-
Got another member's 350 back together and running. Gonna take a bit to seat the new ring.
-
I put a 2x4 on the bottom of the right side then beat on another 2x4 on the top left. I should have used a gentler method but that rusty...
-
I've seen some angle iron used to span the box and then a handful of bar clamps on the ends of the angle iron, pull a couple of tool...
-
Dug this out of the tool dump. Three drawers were in front of another building half buried and this was in the back of a junk truck. It...
-
I got the the frame rolled out from under the body on my 4runner. Now I just have to do a little welding and strip prime and paint it.
-
I put a thick coat of SLIP on mine last fall. Hoping grass won't stick to it as much as it did to paint.
