ZERO's latest activity
-
My buddies 020t just won't oil. He's changed the oiler, the worm gear and the pick up filter. He's also thoroughly cleaned out the oil... -
The factory spec is often pretty rich. Making it richer than that makes no sense to me. Be aware your factory spec is not valid anymore...
-
At this point I won't go back either. I have an MS400c with Mtronic snd a Husky 550mk2 with Autotune. I had one glitch with the Mtronic...
-
I buy/MM a saw, I tach & tune it just shy of factory spec rpm and never touch the carb again!
-
I have (2) MS261c. (1) DOM 2018 has M-Tronic 2. (2) DOM 2023 has M-Tronic 3. I like the M-3 over the M-2. The M-3 has 6 tanks thru...
-
Yes. As you said, a saw would be very difficult to do any work with if tuned 1/8 turn rich of factory max no-load. 1/8 turn rich of...
-
Is that what he meant?
-
Anytime! And I agree - you’ll likely just have a little missing towards the bottom. No biggie! If you look close enough at my...
-
It looks like that may actually clean up the holes I put in mine. May end up with a little half moon out of it on that bottom corner. We...
-
Here ya go: Observation: I just took this now, and as you can see, this is a non-Mtron cover on my Mtron saw. Local dealership...
-
I noticed the throttle response when I went to the exposed filter on my 462. It was already quick, but it is better with more air coming...
-
Thanks Nic, but I’ll be starting a new logging site later this week 🤞🏻
-
There is plenty of firewood at the farm that needs cutting if you want to test it out.
-
I am running one. I received one about a month ago, but due to poor weather and a halt to logging, I have very limited time with it. I...
-
Thank You! :thumbsup: Color me blue guess I envisioned the coloring penetrating deeper as the line is further back from the bar rail...
