ZERO's latest activity
-
This is where a lot of the argument comes from. People disagree with it so they sand off the paint and think it proves their point when... -
Piston looks excellent
-
Found a Red Light. Really dirty but should clean up nicely.
-
I often blow some glass beads down the transfer tunnels in a cylinder after I port the transfer ports, just to clean up any casting...
-
Looks real good!!
-
5min, all 4, lol
-
Ah, hadn't tried that...have glass bead booth 😃
-
I boil cylinders in straight Purple Power and it does pretty good with carbon. It doesn't get all of it but it gets most of it. Another...
-
Glass bead blaster takes carbon out of a chamber really well.
-
2+ days of soaking in Sea... It got some of it :p Getting the exhaust port cleared is easier :p Not easily chipped out with a...
-
The concentrate is mixed to 10% to 20% in solution with water. It's good for more than one use. I used a gallon of mix to clean a dozen...
-
Ah, so it is a concentrate at 99%, not used straight. Same question, however. Is this something that can remain in the US tank for...
-
You don't need a gallon of 99%. It's generally mixed 10% to 20% in distilled water. Wear gloves, it isn't acid.
-
SAE 30 most likely 🤣
-
But I don’t have a Hazmat suit :p At $100/gal, how long does it last and be effective? I have the proper gloves so that’s not an issue...
