ZERO's latest activity
-
Select Forums, scroll down to chainsaw ads, select whole chainsaw, parts, etc. -
I think you have to have at least 25 posts. At least the way it used to be. ETA. Meant to quote original poster. Sorry
-
Ami missing something? Cant seem to find it. Trying to Buy/Trade some stuff and Or sell/Buy some chainsaw stuff. Maybe i am blind :)
-
https://opeforum.com/forums/chainsaw-ads.8/
-
It's difficult to do a pressure vac test on a 797 as the decomp valve has a hole going into the exhaust port which would need to be plugged.
-
It may a dealer-installed replacement cylinder - most of those had no markings and were not painted. Sometimes the dealers would stamp...
-
I've finished making blanking plates and rubber gaskets to perform a vacuum/pressure test. When I took the muffler off, I noticed the...
-
Definitely reclean your points even if they are new. New points i clean with 1200 grit sand paper then rub clean white paper through them.
-
Good to know, now I need to work out how to make one!! 🤣
-
On some of the early attempts for the one man saw diaphragms I just used LocTite 380 to secure the plate to the diaphragm. In one case...
-
They used a 2 stage progressive die set. I spent 20 yrs in a punch and die tooling shop.
-
I'm glad it made it there in one piece. I hope to find more oddity's in Tucson at some point. I never heard back about the power tool...
-
I appreciate it, I have the gasket material and diaphragm material cut, just haven't taken the step to punch out the rivet and place it...
-
If you simply need the diaphragm cut with rivet holes , I'd be able to do that for you....I'd need the original to work from, and I...
-
Because the original had thin metal around (.015" thick) on both sides, and we only needed it on one side without rivets, I had them...
