ZERO's latest activity
-
Getting ready to make another run! -
I sure do Mike, it is fun but it is VERY cold blooded so this time of year it just sleeps!
-
Diamond probably has them but I haven’t checked their site in a while. They are not as good, imo, but many here like them.
-
So I have to order one from Lithuania? There is no dealer in the US?
-
Baltic has them…I have a couple. Shipping from Lithuania is still costly so take that into consideration. I have a new one in route so...
-
I believe that baltic abrasives have them I bought them from a now deceased man in minnisota
-
No, we are just too poor for Stihl to try and charge us 4.5 Euro for those! :rolleyes: On a serious note, might be a box I got a...
-
Old stock? They are 4.5euros over the border... https://unicommerce.si/zaboj-za-shranjevanje-verig
-
I believe the math formula for correct number of saws is Rm+ or some such similar which is one more than the present number of saws you...
-
You can swap the covers on the 026 carbs for ones that don't have the impulse and smart carb filter reference, or cut them off and plug...
-
Since it's been mentioned I'm in the process restoring two 49 cc Partners .500 and 5000 plus which from what I see are the same saws...
-
I have a Partner 500 with a ported Husqvarna closed port 55 cylinder, I used the 55 carb but bored it out and drilled the main jet. It's...
-
A little more on this .At least 12 or more years ago I ran a 5000 Plus at the saw races at Chardon Ohio . It was a gasser ..My bud Kevin...
-
In my case the plan is getting both running .The second coil I should get today for the 500 ,the 5000 already does run .Then chain them...
-
I have now experimented with some carbs and found the WT194 as the best bolt-on carb. The saw has plenty of power and will run with my...
