ZERO's latest activity
-
I love love love the 372xpw. Today I found one like brand new. Bet it doesn't have 3 tanks through it. Came with 2. 28inch sugi light... -
https://opeforum.com/threads/clean-chain-anyone.26111/#post-1349151 https://opeforum.com/threads/best-penetrating-oil.26304/#post-1356980
-
Sabre saw Metabo PS E 0525 for $8, damaged cable, the equipment is 37 years old 🤠👍 I added some grease and soaked the felt in oil
-
I didn't find one. Plenty on the internet though: https://www.iforgeiron.com/topic/68445-vice-restoration-w-electrolysis/...
-
I made a comment, got 3 back. Guess I Have some reading to do. I have a RUSTY 52" circle saw blade to experiment on. Any threads...
-
Ammonium nitrate 😎👍
-
My cannon roller nose takes a 108,i it’s 40” overall. I hate .404 skip round file chisel, square ground skip is fine. The round file...
-
I have a chain question for you guys. My S797 came with a 36"(40" total length) guide bar, but no chain. It has a 7 pin .404 rim...
-
Okay, I see that both of them use the same bearings/seals/protector ring, I just figured that there was other changes that constituted a...
-
Looks like -14 is the updated part number for the -12. Should be the same part
-
I searched and cannot find the answer, I know it has probably been discussed before…What is the difference between the 580 66 37-12 and...
-
ZERO reacted to jacktheripper's post in the thread MCCULLOCH The official McCulloch thread with
Like.
Mark, is it a saw that parts could be found for, and is it worth much when restored? Both monetarily and utility-wise? -
ZERO reacted to jacktheripper's post in the thread MCCULLOCH The official McCulloch thread with Like.
Here’s a 910
-
ZERO reacted to jacktheripper's post in the thread MCCULLOCH The official McCulloch thread with Like.
There are many things in this shed… 😅😁 I am going to go back at some point and make him a batch offer. Many Jonsereds because they were...
-
With no automatic oiler, that shroud under the fuel tank, and the fuel line passing through the top tank half it should be a 1-76...