ZERO's latest activity
-
I try to cut firewood at least two years in advance. Summers here are oppressive, especially this last one. Of course, this summer was... -
I'll be danged. I didn't know that. Learn something new every day.
-
Says rite on some I get, (void after 90 days)
-
yes been that for a very long time. although the delay time is shorter now.
-
ZERO reacted to lehman live edge slab's post in the thread Post up your ported cylinder Artwork with
Like.
Be curious if your mod will do more gains than the typical connect the holes into a widened slot on the factory muffler set up that I’ve... -
I was hoping you'd post the video of you and Julian in the "wood lounge".
-
Stock factory intake port Dolmar ps6000i, aka 116si.
-
Now I gotta find a 372:mad:
-
The big hole flows more guys are totally ignorant as to how a two cycle works.
-
I sell the Z-clones. Pull the base gasket, tickle the muffler, swap to a paper filter setup. They will smoke any name brand saw that’s...
-
Those zenoah clones not the wemars just the generic one's were like 55.00 shipped a couple year's ago so I bought a 58cc and 62cc they...
-
I used to have one and it’s a handy little saw but now I have 350’s with muffler mods and base gasket deletes. They run much better than...
-
what @ammoaddict said. I drilled a couple 3/16" or 1/4" in the front of muffler on mine. once I got it tuned, it really woke up &...
-
You could do a muffler mod on your 450 and retune the carb. It will wake it up a bit.
-
I'd stay away from cheap clones. If you want to sell your husky I'd get a husky 562 or Stihl 362 and a 20" bar. How much does your saw...