ZERO's latest activity
-
Dumb question sorry. I have a husky 450 and never really been. Impressed by it. I ran my buddies joncutter 5800 and it seem to scream... -
Awesome, glad to hear you were able to resolve the issue!!
-
Sort of forgot about this thread until I received a notification of the last post. To close the loop on the thread and the issue, it...
-
Check how the spool is wrapped, direction, with line, also, is the spool installed correctly? If the head doesn't rotate check the flex...
-
I've done the timing advance on my MS400 for about nine months, and it made a huge difference! Significantly stronger, and a pleasure to...
-
ZERO reacted to lehman live edge slab's post in the thread How many degrees timing advance MS 400? with
Like.
I do a 1/4-5-16” outside diameter which is what you did roughly on a couple 400’s and a bunch of 362’s for a tree service and the 362’s... -
ZERO reacted to mainer_in_ak's post in the thread How many degrees timing advance MS 400? with Like.
Do u remember a 67 cc saw with actual torque? Ignition are so aggressive on the 680/620/7310, u dont have to mess with em. Still in...
-
Okay, familiar with basic performance modifications here and rebuilding saws but have never done any timing changes. Viewed from the...
-
i like 10deg
-
ZERO reacted to lehman live edge slab's post in the thread How many degrees timing advance MS 400? with Like.
Hi Scott, guess I can go a bit more than I am than.
-
Spooky. Your backwards. The saw rotates counter clockwise when viewed from the flywheelside. You want to make the fly wheel go...
-
Ahh... having a blonde moment. Of course, flywheel rotates counter clock wise while saw is running. PTO side rotates clock wise. Just a...
-
The part that gets me is when you take the flywheel off and your filing it because its upside down or backwards depending on your...
-
Most echos have aggressive timing like that which is part of what adds to their torque.
-
Magnet gets to the coil earlier