ZERO's latest activity
-
Which ever is cheaper! The fact that the MS250 is still available definitely tells me there is still a strong market for it. -
I prefer the two bar nuts on the 250 over the single bar nut on the 251. Given the choice, I would probably take the 250, they have been...
-
Hi all, Looking for a backup saw to my 261C and hesitant between the two models. I mainly cut firewood for our home so no super...
-
Good call, I will look at getting some!
-
Liquid electrical tape outta do just fine.
-
I received some parts today and got a start on getting my friend's Husky 61 back together. He said that he got it about 20 years ago...
-
If it's supposed to stay on the shelf, it won't interfere with anything 😉😎
-
These are the drawings in the IPL if that helps at all:
-
Any chance they'd look the same and bolt up but timing be different?
-
Part numbers differ, but not sure if that is just the model designation: 026 - 1121-400-1200 029 - 1127-400-1200
-
I bet you could feel it at WOT if it was unbalanced enough to cause issue. If it does vibrate, maybe knock fins off opposite. 👌
-
Don't know if they're the same but I've got an 026 flywheel.
-
Yeah, best bet would be to replace it or you could chrome it 🤣
-
The magnets are scratched up as well, it was rubbing on the coil it looks like.
-
From what I understand, broken fins can lead to imbalance and later other issues (possibly air leaks). If it was one fin, I probably...
