ZERO's latest activity
-
I noticed the carb body goes straight to the manifold, no gasket, on this 026 I'm building. Tempted to put sealer there. -
I always put a very thin layer of motoseal on both sides of crankcase gaskets. I’m sure it’s not necessary but I figure that everything...
-
motoseal on base gaskets, dirko on clamshells
-
Used Motoseal, loctite of some variety, got Reinzoseal now and have used it twice. Vintage motorcycle restoration guy recommended it...
-
I seem to be in the minority with Right Stuff (Permatex). I’ve used it fairly extensively and have never had a problem. I’d be slow to...
-
I use motoseal for base gasket delete
-
I use it as my base gasket when I delete them. I have been using dirko and hoping I do not have the take the saw apart and clean it off...
-
As a break from arguing about oil, let's talk sealants. Who uses a sealant on crankcase gaskets? Base gaskets? Intake boots?
-
anybody got some numbers please, thanks .
-
If @Benwa would come around …
-
I have a couple china saws. Being mechanically inclined and knowing how to tune a saw helps. Dont expect pro saw longevity but they will...
-
Thanks for the input. After a little more reflection, I'd expand a little on my "question", or clarify it, to say that of course the...
-
ZERO reacted to jacob j.'s post in the thread 372 sputters when tipped, passes spray test with
Like.
Have you checked the intake boot for cracking? -
ZERO reacted to jacktheripper's post in the thread 372 sputters when tipped, passes spray test with Like.
It can be the carb nozzle check valve. I’ve had saws that ran fine in one orientation, but with an iffy sealing check valve, gravity can...
-
ZERO reacted to jacktheripper's post in the thread 372 sputters when tipped, passes spray test with Like.
Excellent advice