ZERO's latest activity
-
ZERO reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with
Like.
Seems healthy Saw is almost new. I blew it off first (desert wood is filthy dusty) Not sure if it was sucking air there or I... -
Check to see if the crankshaft has perceptible sideways play. I just had one I was working on a week ago that had a worn-out PTO bearing...
-
ZERO reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with Like.
I have some stiff 1/8” rubber I make block off plates with
-
I got a heavily scored poulan going with some 90 weight gear oil on the piston and a shot of nitro fuel. I also had a 120psi ms290 not...
-
Does it have a decompression valve? Is it sealing properly? I didn’t see that come up in the discussion…
-
If you’re looking for top performance, the OG cs-600p had the farthest advancing coil of any saw in that chassis. There is no exact rev...
-
Only 3 years after I got it, I finally got the clutch lapped to the crank and put my CP125 in some wood. It still needs to be tuned just...
-
Beautiful fall colour.
-
That one has a 250 power head attached but the 80cc and weight are the same. Mark
-
The 1-41 chainsaw is 80cc, power head only = 19.5 lbs
-
80cc, I dunno the hp rating.
-
What's the displacement and h.p. rating on that beast? My Honda with a GX35 is 36 c.c. and a whopping 1.3 h.p.
-
ZERO reacted to lehman live edge slab's post in the thread MCCULLOCH The official McCulloch thread with Like.
Stihl made a similar ones with an 07,08 and 041 powerheads. Then the made the lightweight one with an 020av on it .
-
Requires two workbenches.
-
Goo Gawd that thing is massive. Gonna stop whining about my 4 stroke Honda.