ZERO's latest activity
-
I'll probably wait until the 200 year anniversary saw is launched, before I take action. -
I do both. Call me after Church if you need something
-
Well he seems to like it enough to want to keep it.
-
How much is shipping lol
-
Selling or giving away?
-
In theory I did not "buy" anything today other than to pay bills.
-
Picked up this 7x12 target It mounts on a 2x2 but I'm going to try a piece of gas pipe
-
ZERO reacted to huskihl's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with
Like.
I have actually never done a vacuum test where I couldn’t hold out on the dcomp and not be able to seal it up. I could see where carbon... -
ZERO reacted to hacskaroly's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
Yes, you should be able to do that, if it still leaks, then there might be something (carbon) between the decomp and its socket that...
-
ZERO reacted to sevensandeights's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
Can I just manually hold the decomp in the "out" position? Anyone know the thread size for a Dolmar decomp valve or have a link to the...
-
ZERO reacted to Sloughfoot's post in the thread 372 sputters when tipped, passes spray test with Like.
My air leak game (or lack of) needs work. What do you seal ports with?
-
ZERO reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with Like.
I found the shutoff wire loose and coil gap off. Reset the gap and left the shutoff wire disconnected from the coil in case there was an...
-
I need a oem 372 cylinder put a hyway bb on yours and I'll buy the oem cylinder from you.
-
ZERO reacted to tree monkey's post in the thread 372 sputters when tipped, passes spray test with Like.
put a carb kit in it
-
Might be able to remove the clutch, worm gear, oil pump off PTO side and pull the bushing and see if the bearing retainer is still in...