ZERO's latest activity
-
ZERO reacted to Junk Meister's post in the thread Landing Saw Sharpening, Lil' Help Please! with
Like.
A LOT of Good information for only 8 posts. -
ZERO reacted to Brad Button's post in the thread Landing Saw Sharpening, Lil' Help Please! with Like.
You should not be using a Diamond wheel on a steel chain. You need to use a CBN wheel that is made for steel. Diamond is for the Carbide...
-
ZERO reacted to beaglebriar's post in the thread Landing Saw Sharpening, Lil' Help Please! with Like.
Get the grinder wheel spinning real fast in the opposite direction then turn it on. It’ll keep running that direction. ( Think cordless...
-
ZERO reacted to Stump Shot's post in the thread Landing Saw Sharpening, Lil' Help Please! with Like.
Harvester chain is usually 3/4" you can measure center to center across three rivets to tell. I guess I would have to ask the operator...
-
I think I received a small grey square "dressing stone" with each of my Diamond wheels. 🤔 So, there is that. :thinking:
-
I find burr creating chains (soft chains) annoying to grind as the burr interferes with visual confirmation of the cutters being sharp...
-
You may have to rewire Your grinder so You can spin it in reverse too if the burr bothers You. Beware, the sparks will fly Your way. I...
-
Not a big deal. The burr should disappear within a second, in use, if you are grinding correctly. How are you ‘dressing’ a ‘diamond’...
-
I have been sharpening landing saw chains for a logger in a trailer set up at the landing for a repair shop. Using an Oregon chain...
-
This vise was one of the best purchases I've made.
-
i have a few of these left for sale. don't think i'll be making any more of them. pm me if interested
-
I finished up the gearhead flywheel key swap last night but I want to be sure I have the flywheel nut on tight enough. Gonna seek out...
-
ZERO reacted to jacktheripper's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
That’s great.
-
ZERO reacted to SawAddictedFarmer's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
Sweet!!!
-
ZERO reacted to Mastermind's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
I have the machine work done, and Jon has your muffler done. I hope to have the port work done by the end of the week. I wasn't at all...