ZERO's latest activity
-
What went on here…. Eye see😏 -
My humble collection. Racks are all scrounged up. Sweet gum, oak , oak, pecan and maple, oak. Trash pile is bradford pear and the ugly...
-
ZERO reacted to huskihl's post in the thread HELP! How to know when you have too much hook with
Like.
This^. Sharper angles cut faster but don’t last as long. Blunt angles cut slower but don’t dull as easily. When your file is too low... -
It all depends on what you’re looking for. The sharper the hook the faster it should cut but it will have a more fragile cutting edge.
-
I’d say that looks pretty good. If anything it’s on the aggressive side.
-
ZERO reacted to hacskaroly's post in the thread HELP! How to know when you have too much hook with Like.
I lock my bar into a vice so that when I am running the file, I can give the file a little upward pull while filing and that seems to...
-
ZERO reacted to Maintenance Chief's post in the thread HELP! How to know when you have too much hook with Like.
Remember that you should have 10-15% of the round file above the top plate. If the file is diving down farther in the cutter your...
-
I’m slowly trying to convert from 2 in 1 filing to hand filing. How do you know when you are getting too much hook to your cutter? Is...
-
ZERO reacted to SawAddictedFarmer's post in the thread Troubleshooting MS261CM with ohm meter with Like.
FYI 2018 Traverse is known in my area to crack the exhaust manifold and make a bonfire out of the whole car.
-
Cut like crazy....................
-
ive “fixed” more than one oil pump by spinning it the other way by hand with the normal outlet submerged in oil so its sucking instead...
-
There's the culprit, I hope
-
ZERO reacted to huskihl's post in the thread HELP! Help with first time porting Echo 800P with Like.
Hard to do without the proper tools, but I would raise the upper transfers a bunch more than I raised the exhaust. I’ve never done an...
-
ZERO reacted to mainer_in_ak's post in the thread HELP! Help with first time porting Echo 800P with Like.
Yep it works fine. CS 800p or the CS 8000 isn't a real valuable or competitive saw compared to the stihls and husqs. So makes a great...
-
ZERO reacted to farminkarman's post in the thread HELP! Help with first time porting Echo 800P with Like.
0.040” is actually pretty tight squish compared to what I have found on other Echo saws.