ZERO's latest activity
-
Thank you :) -
Perfect Ray!! Yes that's essentially where this is set, about flush with the carb gasket mating surface (where the metering diaphragm...
-
Na they're different unfortunately!
-
084 service manual - page 75, troubleshooting chart remedies.
-
I don't think the lever setting in these carbs differs from that in the HS series. So the lever should be rather flush with the inner...
-
Looking great Mark. One hellava museum.
-
This years "float", I did make the round trip with the 99 (two man saw) idling away. I saw a lot of smiling faces in the crowd watching...
-
Yep, planning to get some of those as well!
-
Good old water is nice to have also. Most fire departments carry these for small class A fires. If you look in your classified ads there...
-
Thanks, yes I wrote the purchase date on each new one.
-
Glad you got it out. It's surprising how fast extinguishers run out. You can't have to big of an extinguisher or multiple extinguishers...
-
I put out a fire in my JD 318 engine bay with 2 16 oz Buds many years ago after they went through me. If you don,t have a proper fire...
-
Might suggest you start by looking in the cupboard. 🥴 does not come with the fancy packaging and marketing but a welding blanket is...
-
The vapor pressure of modern gasoline is absurdly low. I was running my 038 in some recent hot weather. The normally rock steady carb...
-
Here is the start of a few posts that Randy did several years ago: https://opeforum.com/threads/the-572xp-update-thread.22661/post-1158022
