Woodslasher's latest activity
-
Woodslasher reacted to cgraham1's post in the thread Random pics (that you took) thread... with
Haha.
Do you feel better now that you posted that? cALiFoRniA!?!!! -
Woodslasher reacted to davidwyby's post in the thread UPCOMING SoCal snowbird GTG Feb 21st ‘26 with
Like.
Yeah Your saw and your self -
Woodslasher reacted to davidwyby's post in the thread UPCOMING SoCal snowbird GTG Feb 21st ‘26 with Like.
Feb 21st
-
Who Goosed da Moose By Ivan Dot Dunnit
-
Philbert
-
Woodslasher reacted to davidwyby's post in the thread Not so pros 4 new and without politics or drama with Like.
Evening gents @Stump Shot 288 was employed to cut a Euc log for a mantel. It was all the 1500lb liftgate wanted Mount signal
-
One thing to remember, is that the 3/8lp sprockets are larger than the same pin sprocket in standard 3/8. So a loss in torque should be...
-
Woodslasher reacted to jacob j.'s post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I remember when the old man would come home from a day of putting timber on the ground with a Mac 125. He sure was grouchy sometimes...
-
Or, his sig Pic offended a cat person...
-
Probably because you have common sense and logic!
-
Woodslasher reacted to S&S_Work_Saws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I did some digging tonight in my piston pile and figured out a Stihl 028 with the smaller 44mm bore piston looks to be almost identical...
-
For now I decided to put it together as it is and keep it in the display. If I can find a good source for those seals I will acquire a...
-
It was also locked up. During disassembly it spun over, then locked up again... Plain aluminum bore cylinder and chrome plated...
-
Turns out the SEZ was very leaking at the crankcase cover and the cylinder to crankcase mount. I've put it aside for now. Here's...
-
…and you have guys that work in shops that can’t figure out how to do that with the proper equipment 🤦🏻♂️