Woodslasher's latest activity
-
Ran these four today. The 61, 041, and 031 are running like champs. The 450 was running good, but now it decided not to oil. I’ll have... -
Woodslasher reacted to mgr1's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
Found 2 of these Dolmar 112. Those are in Belgium colors. -
P41 High Performance Build
-
Generally speaking the 49/52 series came with the .325 X 8 setup. However the 52/52E and 521E frequently got changed to the 3/8 X 7 or...
-
Thanks Jay. I found this information on Another Site. Based on this, I have a 21238 coming from eBay. Looking at the eBay photo...
-
I believe I found the spot for that spring, not shown on the IPL but the only place I could come up with. Putting the saw back...
-
I have a local guy volunteering in the shop these days, he searched through the IPL and found 18 springs, but all were accounted for in...
-
Ray is the greatest of all times! Thanks Old 040 as well. I have already been able to find that bumper in the photo above on the IPL...
-
Woodslasher replied to the thread SELLING The new Husqvarna 564xp.C'mon, be the first guy in Little Mexico with a Scottish ported 564!
-
Tiny pointed and/or flat burs. It’s not crazy important to have it perfect, it just can’t be high. I try to make certain I’m at least...
-
My post was different than what they were talking about previously. Those arches that Al probably cut deeper are to make room for the...
-
Doc, the cylinder extension won’t fit all the way down in after you machine the base without removing this area on each side where the...
-
-
Base
-
Stihl moar