Woodslasher's latest activity
-
Cluster is here.. Need to install. Ton of paperwork with it I really should read first. -
-
-
Woodslasher replied to the thread 372 sputters when tipped, passes spray test.Out of 5 or more 372-chassis saws I've stripped only 1 had an o-ring present and none of the ones without it exhibited any sort of...
-
Woodslasher reacted to EFSM's post in the thread 372 sputters when tipped, passes spray test with
Like.
Yes the seal will be leaking, but chain tension will have a lot more to do with crankshaft position than saw orientation will. They do... -
Woodslasher reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
Something else I’ve learned along the way. If your carb screws are normally at one and one, turn the H out 2 turns. Hold the saw wide...
-
Woodslasher reacted to Wilhelm's post in the thread Random pics (that you took) thread... with Like.
Some heavy duty diodes, no markings on them. I will most likely cut away the board around them as to keep them in a batch.
-
Woodslasher reacted to Wilhelm's post in the thread Random pics (that you took) thread... with Like.
I used to mess with electronics, still feel bad discarding components into E-scrap and occasionally salvage out items. 4 Amp rectifier...
-
Woodslasher replied to the thread 660 piston in 500i.Yep, emails begging me for donations is a big no-no in my book especially when I no longer use their site. I don't log in, they don't...
-
Small ash tree with the help of my sons and grandson. We couldn't quite fit all of the wood in my 5x8 utility trailer so that small...
-
Woodslasher reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with Like.
Seems healthy Saw is almost new. I blew it off first (desert wood is filthy dusty) Not sure if it was sucking air there or I...
-
Woodslasher reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with Like.
I found the shutoff wire loose and coil gap off. Reset the gap and left the shutoff wire disconnected from the coil in case there was an...
-
Woodslasher reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
My latest DOLMAR: CA from late 1960s or early 10970s in very good condition. My 4th CA in the collection.
-
Woodslasher reacted to jacob j.'s post in the thread MCCULLOCH The official McCulloch thread with Like.
McCulloch find of the day: https://www.ebay.com/itm/226832116898 I'm gonna need an OPE member to take one of these and clear four acres...
-
Woodslasher reacted to redneckhillbilly's post in the thread resurecting an old circular sawmill with Like.
heres the future powerplant, got it running today, its getting hauled in tomorrow morning, gonna try to use as much as possible off this...