Woodslasher's latest activity
-
-
1978 xt500e sitting at the home place. I'm original owner. Other parts of life took over and the bike was left with corn-gas in it. Pin...
-
-
Philbert
-
-
For what it’s worth, I always replace the fuel solenoid and filter first on one with running problems. Had a 201t that was idling high...
-
Also, if saw is 2.0 it usually wont have any markings from memory, but on the emmissions lable there will be an M3.0 if its 3.0, see on...
-
https://blog.stihl.co.uk/perform-m-tronic-reset/
-
When, and how to reset for different versions? Production dates for different versions? No guessing! Poast good information not "my...
-
Hehehehe @jacktheripper
-
Got an evacuation notice close to me, figured out I knew the guy, talked to some ex co workers about it and found out my one foreman has...
-
Modified Mark provided me with the details on the seals (I had the right parts on hand), and Bufford Parrish had rings, the AF cover...
-
Woodslasher reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with
Like.
Ed - your PM55 has points ignition, make sure any crankshaft you get has the points cam/lobe. All of the 54, 57, 60, and 71cc 10 Series... -
Woodslasher reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Scott, I would normally start with 1-1/14 turns open on both H &L. The fact that it starts with throttle and no choke would indicate...
-
Woodslasher reacted to Scott Kelsey's post in the thread MCCULLOCH The official McCulloch thread with Like.
Hoping someone here will help me out as I did some searching, but can not find what I am looking for. I recently purchased this Pro Mac...
