Wilhelm's latest activity
-
Wilhelm reacted to hacskaroly's post in the thread HELP! Ms460 Arctic parts robbed off saw with
Like.
Yeah, it got pretty hot on just a test run. Once I knew it got warm, I turned it off. If I need to use it before I get a front element... -
I wouldn't use the G with only the rear element working, it's the front handle that requires watts from the generator. If you use only...
-
On Husqvarna there is around 4 ohm resistance in the front handle, it has been on the 1xx - 5xx series, but the 5xx has a nicer heating...
-
Wilhelm reacted to hacskaroly's post in the thread HELP! Ms460 Arctic parts robbed off saw with Like.
The front handle was replaced with a non-heating element handle (standard handle). I have the wires connected back up to get the rear...
-
Wilhelm reacted to hacskaroly's post in the thread HELP! Ms460 Arctic parts robbed off saw with Like.
Yeah, I have seen that, I think @Tor R detailed the process on Huskys in an older post. It doesn't get that cold here and I have other...
-
Wilhelm reacted to hacskaroly's post in the thread HELP! Ms460 Arctic parts robbed off saw with
Haha.
Welcome to the forum!! Isn't it great when someone gets in there and rips out all the good stuff? I have a Husky 272 XPG that someone... -
I did take metal work in High school which has helped me many times.
-
-
I would personally be interested, but this guy likes to go to the dealer and buy parts.
-
I know where there is a couple dolmar 7310s that would fall into the modernish category
-
Yikes, I will remember that. Is it supposed that the oil itself is subject to pre-ignition? Or the additive is lowering the octane of...
-
The stairway will be very nice one the inventory is moved into the new building, at present it is a long ways from the shop to the parts...
-
That stairway is a huge improvement! Philbert
-
Ok…that clock is way cool. Where did you get it?
-
I've been slacking on my progress reports. After several attempts the concrete floors are done, grind and seal up front and solid color...