Tor R's latest activity
-
I relieved the AF holder so that any spitback could get sucked into the strato’s. Seems to make a difference on the Dyno I’ve been... -
I do not. I wound up opening up the factory outlet on the saw and not adding the extra deflector. I went to around 80%. I added an...
-
Knot your father’s Oldsmobile…
-
some fine looking work as always
-
-
-
Snow dampered my time and will damper finding a suitable test log. Finished the jug, timing advanced. Did a little mod on the air...
-
Good to hear. Been concerned that Stihl may lower the quality of their plating like it appears the competition has.
-
Port work is superb. We get to see any video?
-
Yerman R&D meeting after the Christmas party…”Let’s try gashing the exhaust port” (I can’t speak or typeGerman) 😂
-
Yes, remarkably well. The factory plating doesn’t flake off like the AM stuff. It’s quite adherent. The toughest plating I’ve ever...
-
104.5/118/120
-
I widened the exhaust to 32.5mm, which is 65% of bore. I use paraffin wax and a lube for cutting the uppers.
-
-
Good morning. Jug done. Onto the mufkin after the day job. The exhaust port has some plating and a Husky-Esq groove outside the port...
