tallgrass_coyote's latest activity
-
Ttallgrass_coyote replied to the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?.Walked out to the truck to put away some tools anout 11. Had no idea it was happening, I'm sure I missed a bunch more but it was...
-
-
THickory, Pecan, and white oak are the 3 most preferred. Apple and cherry will work
-
TFlap wheel FTW
-
TYes, worth repairing! If you pull the cylinder off and check, you might be surprised, there might be minimal damage if any on the...
-
TDon't hold back, that plating is tough stuff. Great first rebuild candidate you have there.
-
TKeep going. Have to to remove ALL of the transfer. You're gonna be at it a while with 500 grit. After it's gone hit the bore with red...
-
TDug a little deeper. The engine is item #44 in the parts diagram, which is described as a Briggs 133412-0059-01. The carburetor part...
-
Ttallgrass_coyote replied to the thread Husky 350.
-
-
Ttallgrass_coyote replied to the thread Husky 350.So I hit it with some 500 grit, I can definitely feel a low spot with my fingers here below, and also above, the exhaust port. Not sure...
-
Ttallgrass_coyote replied to the thread Husky 350.Thanks, head is still spinning a bit.
-
Ttallgrass_coyote replied to the thread Husky 350.Okay, cylinder and piston are out. I think the cylinder is f'd but I defer to the experts. It's a 45 with the dish top. This thing...
-
-
Ttallgrass_coyote reacted to Sawdust Man's post in the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread? with
Like.
Yep, 20" planer. -
Ttallgrass_coyote reacted to Hedgerow's post in the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread? with Like.
It weighs about 250 pounds.
-
Ttallgrass_coyote reacted to IffykidMn's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
I have ran down to -10f without the shutter and never had icing problems, not many winters anymore that it does not warm up to at least...
-
TIf there is removable covers on the sides of the cyl. it is the dished 45 piston.
