Stem's latest activity
-
‘Stealerships’ is what I have always called em. I’m convinced that they take the actual labor time and add 1-2 hours. I will go there... -
Stem replied to the thread I saved over $500.I try to do as much of my own work as I can, esp with Toyota (I have a '13 Tacoma). buying OEM parts from the mothership is bad enough.
-
I had a brake job done on my Toyota FJ by a tire shop. I mentioned the leaky axle seal, and afterwards they told me they don't do that...
-
Stem reacted to mrxlh's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with
Like.
CBN wheels will be your friend on clean chains, no dressing, and can be re-coated for about a 1/3 the cost of new wheels. -
Stem reacted to Philbert's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
My generic advice to all who are new to grinders: ‘Keep in mind that grinders don’t sharpen the chains: you sharpen the chains. For...
-
Stem reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
27ish/55/0 is what I came up with for my 1st chain, Im gonna bury it a piece of doug fir in a few hours and test it. I gotta admit this...
-
Stem reacted to huskihl's post in the thread Raising The Uppers With The CC Speciality 182 AMC with Like.
Another little something that I found… When you’re trying to do the left corner, spin the jug around 180° and point the handpiece away...
-
Stem reacted to Mastermind's post in the thread Raising The Uppers With The CC Speciality 182 AMC with Like.
I talk to a lot of guys that tell me how they have trouble with the right angle handpiece jumping and chattering in the corner when they...
-
I felt like the vitrified wheels loaded up or glazed over very easily leading to overheating of the chains. Grinding seems to be pretty...
-
Out of curiosity, what was your main problem with them? You can also sharpen 3/8 standard chains with a 1/8'' wheel. You just need to...
-
used,,,I can see if i like this,,, have always hand filed.
-
Moved it for you. I'm a little biased (ok, a lot biased) towards China saws. So I'm gonna blame that for the issues.
-
Picked this up outta the dingweeds this week, cleaned up pretty good i think.... still needs a few pullies replaced that are noisy, but...
-
-
sniff sniff...