Squish9's latest activity
-
SSquish9 reacted to Wilhelm's post in the thread 18" Chain .325 .063 74 DL Full Chisel SKIP? with
Like.
I recently noodled with .325" full chisel full complement. Did fairly well. That full skip would do great for noodling IMHO. -
SSquish9 reacted to pbillyi69's post in the thread 18" Chain .325 .063 74 DL Full Chisel SKIP? with Like.
a full skip chain on a small bar is pointless. the reason for the missing cutter is to make room for chips being pulled out of a long...
-
SSquish9 reacted to Junk Meister's post in the thread HELP! How to know when you have too much hook with Like.
AND give your chain a looking over to know what you need to do before you start filing.
-
SSquish9 reacted to EFSM's post in the thread HELP! How to know when you have too much hook with Like.
There is no substitute for knowing what a properly sharpened chain looks like.
-
SSquish9 reacted to huskihl's post in the thread HELP! How to know when you have too much hook with Like.
Spot on. Thing is, cutting hardwood under 28-32”, you can’t make enough chips for the Buckin Billy Gullet to make any difference at all...
-
SSquish9 reacted to EFSM's post in the thread HELP! How to know when you have too much hook with Like.
It all depends on what you’re looking for. The sharper the hook the faster it should cut but it will have a more fragile cutting edge.
-
SSquish9 reacted to huskihl's post in the thread HELP! How to know when you have too much hook with Like.
This^. Sharper angles cut faster but don’t last as long. Blunt angles cut slower but don’t dull as easily. When your file is too low...
-
SSquish9 replied to the thread HELP! How to know when you have too much hook.This is the most common thing I see these days. People have heard get the gullet, they dig in deep, miss everything that matters and end...
-
SSquish9 reacted to edisto's post in the thread HELP! How to know when you have too much hook with Like.
I have had at least 2 people ask me how to file a chain, because they couldn't get it sharp. Once I explained to them that it is the...
-
SYeah and that's out of the box not even tune it or give the chain a rub. The exhaust outlet is tiny might open it up a bit let it...
-
SNot bad at all for a 40 ish cc homeowner saw
-
SFinally got around to giving me new saw a run a ms231 it came with .325 RS. 1st tank of fuel not a bad little saw I'm impressed for a...
-
SInteresting. Even though it cut a little faster, I'd swap the couple loops of RS pro I have even up for SP33 any day of the week...
-
SK2 sounds like it could be. I’ve never seen any Carlton stamped differently on the drive links though. Looks like it “could...
-
SPerhaps the information about the discontinuation of the .404 semi-chisel concerned the factory in the US (or Canada), since it can...