Sloughfoot's latest activity
-
Sloughfoot reacted to Wonkydonkey's post in the thread Not so pros 4 new and without politics or drama with
Like.
Good morning homos It was a lovely sunny day yesterday but dam cold wind from the north. 🥶 Today is the start of a long wkend (... -
Sloughfoot reacted to Kiwioilboiler's post in the thread Not so pros 4 new and without politics or drama with Like.
Morena E Hoas. Easter Friday here, so no work and no school. Maybe I'll go catch a fish.
-
Sloughfoot reacted to redline4's post in the thread Not so pros 4 new and without politics or drama with Like.
Lots of power outages here. No power at work and most of town so I'm at home. Outside it's just a steady noise of branches and trees...
-
Ground the LH cutters on these. RH & rakers next. I wouldn't have had to file these. 60/72DL loops, MS500i, hamfisted operator.
-
Got a polyp removed from my nasal passage. Yall should have that done,,, at least for the experience.
-
Sloughfoot reacted to singinwoodwackr's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Carb rebuild time. And, check that AM filter to see if it actually flows fuel :p
-
Sloughfoot reacted to Seachaser's post in the thread What are you building with your milled wood? with Like.
I hate to bump a three year old picture, but that floor is amazing. Have anymore pictures after finishing?
-
Sloughfoot reacted to stretch5881's post in the thread What are you building with your milled wood? with Like.
My wife asked "Are you ever going to build something, to replace that box you whacked together, to hold up the tv 15 years ago?"...
-
Sloughfoot reacted to Yukon Stihl's post in the thread Looking for ideas on broken stud removal with Like.
I saw a guy take an aluminum can, cut out a hole in it and seal it around the hole Fill with a solution of alum and water In a few days...
-
Sloughfoot reacted to dave b's post in the thread Looking for ideas on broken stud removal with Like.
spent many years working in water treatmeant plants as a industrial mechanic/machinist/welder.3 waste water plants and 1 potable water...
-
Sloughfoot reacted to SimonHS's post in the thread Looking for ideas on broken stud removal with Like.
This. Deep centre punch mark on the stud. Don't try a handheld drill. Clamp the head on a drill press. Run the drill in reverse with...
-
Sloughfoot reacted to legdelimber's post in the thread Looking for ideas on broken stud removal with Like.
Arcing is one issue with something getting hung. But you'd be amazed at how well a layer of oxide/rust can impede heat travel for a...
-
Sloughfoot reacted to Jusgunn3's post in the thread Looking for ideas on broken stud removal with Like.
Reverse drill bits and easy outs…
-
Sloughfoot replied to the thread STIHL The Official Stihl Chainsaws Thread.The guy said he put an AM carb and fuel filter in. Didn't change anything so he put the original carb back. No mention of it being...
-
Sloughfoot reacted to EFSM's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Could be a bad tank vent, fuel line, or carburetor diaphragms. Often, poor fuel pumping is the cause of running well till warm. At cold...
