sixonetonoffun's latest activity
-
Stihl make a 3/8 LP (Picco) rim sprocket for their "mini" spline. The O.D. of the 3/8-7 LP (Picco) is about 1.435" compared to the... -
And since I had all the gear out I decided that 3 months after it hit the bench for a muff mod I'd do the same for my S&S 346. Full...
-
Since I had the 361 on my bench for re-assembly I decided a muffler mod was in order. Nothing fancy, just a deflector and some coarse...
-
Right, well I can see by comparing the deflector on mine with the one you have there that Joe must-have opened up the hole a bit and...
-
sixonetonoffun reacted to Squareground3691's post in the thread Show off your muffler mods with
Like.
The 550 are very restricted and need a large factory opened up and or extra port put in , as I did mine without a screen, I don’t run... -
Yup that was my thoughts exactly 👍
-
if you get the bigger mesh screen it will be like having them out and still have the fire protection they provide
-
I wanted to update on the exhaust screens question that I brought up.. I spoke to Joe and he said "you can remove the screens, removing...
-
I have a feeling he will be back to get a 462 but hell the green undie Deere guys are finicky.
-
sixonetonoffun reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with Like.
OK, so I got to test it. With the transfers done it gained torque and speed. It is now 4-stroking at 14k, and pulling 11.5k in the cut...
-
Pics
-
This is another new 201T. It is new never ran. Not much more I can say. I sold some awhile back and these will be the end of them. A...
-
I know of and personally ran an early 462c that received some serious use, borderline abuse, logging operation. It’s a 19 or 20 year...
-
Maybe after it becomes readily available here in the US. I think an arctic would be super handy since it’s pretty much cold 8 months out...
-
sixonetonoffun replied to the thread SOLD NEW Stihl 201T.That answers the can a 400 replace the 3 main saws I use question lol