singinwoodwackr's latest activity
-
SI would try to heat the head around the spark plug quickly as I could with a propane or mapp torch, to expand it to allow the plug to be...
-
STryna keep the 034 in the wood
-
Ssinginwoodwackr replied to the thread Looking for ideas on broken stud removal.Bzzt…done :p
-
Ssinginwoodwackr reacted to EFSM's post in the thread Looking for ideas on broken stud removal with
Like.
That doesn’t happen if the welding happens quickly enough. -
Ssinginwoodwackr replied to the thread Saw video thread.Shorter bar and 8t sprocket needed :p
-
Ssinginwoodwackr replied to the thread Saw video thread.I’ll strip it down and rebuild from scratch so no problem :p
-
Ssinginwoodwackr replied to the thread Looking for ideas on broken stud removal.Assuming the Al doesn’t melt too badly :p Or, is the melting point high enough to prevent that?
-
Ssinginwoodwackr replied to the thread WANTED 064 crank.I’ll pull out the box and pick through them.
-
Ssinginwoodwackr replied to the thread WANTED 064 crank.I have a bunch of used ones :p I could clean one up and make it all purdy, lol
-
Ssinginwoodwackr replied to the thread Looking for ideas on broken stud removal.I’ve had good luck with making a good center point with a good center punch and/or a small burr. Then, carefully drill out the center...
-
SWe moved a few German saws into the new display area today to keep the Swedes company. I brought over a few other (non-Stihl) saws...
-
Ssinginwoodwackr replied to the thread Husqvarna 2100 thread.Got a few things painted today along with some epoxy in worn or dinged spots. Had an extra top to experiment with... OE Husky orange...
-
-
Ssinginwoodwackr replied to the thread SELLING Ms362 running project.Saw #2. Runs great! I cleaned it up some but it is still in need :p I rebuilt this saw last year...New rings, minor porting, muffler...
-
-
Ssinginwoodwackr replied to the thread SELLING Ms362 running project.I’ll get more pics of saw #2 later…
-
