Shane¹'s latest activity
-
SShane¹ reacted to Sloughfoot's post in the thread 2013 Ford expedition front right brakes wearing out fast. with
Like.
Likely the caliper. Does it pull to that side if you brake hard? Mine did when the caliper was shot, but only when braking hard. -
SShane¹ replied to the thread 2013 Ford expedition front right brakes wearing out fast..Brakes are pretty simple. For uneven wear check caliper pistons, make sure pads move in brackets, make sure caliper pins are free. Easy...
-
SShane¹ reacted to SawAddictedFarmer's post in the thread 2013 Ford expedition front right brakes wearing out fast. with Like.
My bosses truck. It's eating front right breaks. The rotors are in horrible shape but both fronts look the same. What I'm wondering is...
-
SShane¹ replied to the thread The Swap Meet Thread.Just drill 2 holes in a flat piece of steel and put 2 long bolts through and sandwich it against the frame and the tire
-
SThis is from Carl about five years ago. I went through my PL-5 so long ago I don’t remember either.
-
SGoing by what @pastryguyhawaii just posted, if you can measure your seals and compare to the dimensions above it may end up being it! I...
-
SNow let me get this straight ..You're looking at OEM number 65194 ? If so give me an hour or so when the sun rises I'll get out the...
-
SThe Remington RM-1 (Part #65194) oil seal , designed for older models like the SL-11A, SL-4A, and PL-4, typically features an inner...
-
STo the above I just plain could not find it .I think the best shot is going by size if you can measure it .I'll give it another go later...
-
SI might have found it but it's pricey------https://www.ebay.com/itm/265245351510
-
SShane¹ replied to the thread How to weld log splitter?.For $450 why not just by a decent little wire feed and weld it yourself and you will have it for other repairs later down the road?
-
SShane¹ replied to the thread FOUND IT 390xp and 395xp flywheel.You don't necessarily need the key it is just for easy reinstall. You can just line it up where the key should be and tighten it down...
-
SNeed a flywheel for both. The 395xp is a future project, but I just busted the key in my 390xp flywheel.. so thats more of a need, but...
-
SThat's some good looking machine work 😎