Shane¹'s latest activity
-
SGood morning. Jug done. Onto the mufkin after the day job. The exhaust port has some plating and a Husky-Esq groove outside the port...
-
SPort work is superb. We get to see any video?
-
SYerman R&D meeting after the Christmas party…”Let’s try gashing the exhaust port” (I can’t speak or typeGerman) 😂
-
SYes, remarkably well. The factory plating doesn’t flake off like the AM stuff. It’s quite adherent. The toughest plating I’ve ever...
-
SI widened the exhaust to 32.5mm, which is 65% of bore. I use paraffin wax and a lube for cutting the uppers.
-
S104.5/118/120
-
SLike title says looking for a good Jonsered 2150 top cover and handle. Do not care if handle is plastic or metal. Let me know what you...
-
SShane¹ replied to the thread HELP! Jonsered decal.Yeah I was comparing them it is smaller on the bar nut side so would maybe look ok if I painted behind the decal black first. I imagine...
-
SLooks like the 2255 clutch cover decal is close - maybe with some minor trimming it could be made roughly the same shape:
-
SAnyone know of a jonsered decal that is the same shape as the decal on a husky 455 rancher clutch cover? Thinking about getting some 455...
-
SShane¹ reacted to oddsaws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
Finally first rebuild of the year done. -
SI have used Heli-Coils on the intake (carburetor mount screws) for some saws that originally had a coarse threaded screw into the...
-
SShane¹ reacted to singinwoodwackr's post in the thread HELP! Husqvarna 350 Stripped Screw with Like.
If you have enough meat for that insert then, yes. heat it up before trying to drive it in. I've done a couple into Echo 355 cases...
-
SIf you decide to do it, drip the hole about half full and then heat up a small screwdriver and melt the liquid weedwhacker line into the...