Shane¹'s latest activity
-
Scan you test fuel pressure with it running TAC module not compatable with the pedal and throttle body. is the throttle plate closing and...
-
Sjust pluged the scanner into my ls swapped squarebody and TPS is at 16.1% cold idle
-
SI have. I'm using drive by wire. That results in different numbers because the throttle plate itself is the IAC. There's even a...
-
SProper welding attire? Check. Not pretty but will work...
-
SOne more random thought.. When I swapped from the fabricated intake to the stock intake, I gave zero fůckš to the injector locations...
-
SShane¹ replied to the thread Grease Monkey Garage.Me too... Anxiously waiting for an all better
-
S🤞 I got my fingers crossed.
-
SThere are a lot of humans out there that act the same way.
-
SIf it's like a chainsaw a good piss rev or two will help sort itself out.
-
STried that. Tried talking nice to it. Tried talking mean to it. Tried promising it good things Tried promising it really bad things. So...
-
SShane¹ replied to the thread Grease Monkey Garage.Swap stuff from one side to the other and see if anything makes a difference. Try plugs then coils then injectors until you narrow it...
-
SWell, this is fun. My AFR is now in the ballpark considering I've done zero tune adjustments. But..I śhīt you not, the exhaust from...
-
SEd, have you done a tps reset? In this pic your tps position is at 11% at idle. Iirc it should be 0-2%. If it’s above 3% you loose...
-
SSo far holding at 10psi, no smoke noticed. Sprayed soapy water on intake and exhaust as well...
-
SWire harness has been checked multiple times. All terminals checked for location in connectors as well as terminal tension. All wiring...
