Shane¹'s latest activity
-
SShane¹ replied to the thread SELLING Husqvarna 346xp.Nice saw!
-
SNice condition, stock 2011 model 346xp. Starts and runs good. Asking $550 plus shipping PHO.
-
SShane¹ replied to the thread SELLING Husqvarna 350.What about $300 and I'll cover shipping up to $35
-
SDuring the run of the Stihl 041 (and it’s variants) what were it’s main chainsaw make and model competitors - Husqvarna, Dolmar...
-
SProbably the Husqvarna 162SE or the 160S
-
SShane¹ replied to the thread Stihl 041 vs Husqvarna and Others.I would say dolmar 119 and 120 would have offered some competition as far as power goes. Not sure if they ever actually competed in...
-
SShane¹ reacted to Squareground3691's post in the thread Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread with
Like.
-
SShane¹ reacted to MR_T's post in the thread Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread with Like.
You looking for another Makita? I might have a line on a 7300.. New..
-
SShane¹ reacted to FederalQ's post in the thread Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread with Like.
I’m curious if Dolmar had a winter snow guard for the starter/flywheel cover on this series?
-
SShane¹ reacted to oddsaws's post in the thread Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread with Like.
where can I get some red covers these days? I found a couple of German sites but they list the filter cover as Red and the Cylinder...
-
SIs your clutch drum bearing fairly new also? How about that end of the crank - is it in good shape?
-
SI’ve seen this and it’s usually inconsistency in the chain, but it could also be an out of round sprocket on either the clutch or bar tip.
-
SGet the chain rolled around to either a loose or tight spot. Make a sharpie mark on one spot of the rim/sprocket. Also make a mark on...
-
SCheck sprocket.