sawfun's latest activity
-
I just bought a trailer in the same condition yesterday. Microfiber towel and white vinegar will take the mildew right off. -
I would try Simple Green, Mean Green, Purple Power, Super Clean or a similar product. Very likely you will need to wax it after to...
-
-
We skipped 2/3rds of winter and at least 1/2 of spring...
-
Good old kerosene is the cure for a lot of things besides lighting off a brush fire .
-
I finally picked up some kerosene yesterday & put that in the oil tank of the PM800.It puked out at the oil pad like it should,then I...
-
I dug out the Mc Bob cd and didn't find as much as I thought it contained.However are three charts on pistons rings etc .This I did...
-
Now as to the above that was all with OEM McCulloch cylinders and pistons .Using aftermarket like Wiseco the thermal rate of expansion...
-
sawfun reacted to Mastermind's post in the thread MCCULLOCH The official McCulloch thread with
Like.
Mine has 6 transfer ports, and two boost ports. -
Now the engine .There's a lot you can do to it .One variant can have two additional boost ports cut in on the back side of the engine...
-
That's another situation .I've had so far two plating failures on late 70's Macs .I don't know if it was a qualty control problem or the...
-
It's a verified 300 years old walnut tree, needs a bit of trim. Talk to me about HARD WOOD I hand filed at 20 degrees nad kept rackers...
-
sawfun replied to the thread MCCULLOCH The official McCulloch thread.I'd like .005 - .006, especially in an air cooled non-race engine. .003 scares the hell out of me.
-
sawfun reacted to Mastermind's post in the thread MCCULLOCH The official McCulloch thread with Like.
Went on to .005" Calling it good.
-
Ya. 006-.008