SawAddictedFarmer's latest activity
-
SawAddictedFarmer reacted to Lawless's post in the thread Not so pros 4 new and without politics or drama with
Like.
Supposed to get some more serious snow this weekend. Forecast between 5 and 12 depending on how it sets up. I hope it is on the lower... -
SawAddictedFarmer reacted to lilspenny's post in the thread How exactly do you tune a 4mix? with Like.
I have found a few oils that I really like. These are for 4-mix engines.... Saber at 64:1, Motul 710 2t at 50:1, and Motorex Cross Power...
-
SawAddictedFarmer reacted to lilspenny's post in the thread How exactly do you tune a 4mix? with Like.
From my experience with my fs131r, br800x, and fs100rx the valves have needed very little adjustment. It's not as big of a deal as some...
-
SawAddictedFarmer reacted to Junk Meister's post in the thread Not so pros 4 new and without politics or drama with Like.
Looks like your 95 year old neighbor swept the drive for company.
-
Mr. Bill! Not being fond of the smell of slaughter because it had been forced upon me for decades and not eating meat is not the same...
-
SawAddictedFarmer reacted to president's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
I do the far side cutters, & flip the chain around so that the wheel approaches from the low side first to avoid the chatter .
-
SawAddictedFarmer reacted to Duane(Pa)'s post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
I hear you about being a little tricky. Takes a very consistent technique or they will be all over the place. I shaped my wheel with a...
-
SawAddictedFarmer reacted to Only the Tony's post in the thread Not so pros 4 new and without politics or drama with Like.
@Kiwioilboiler Looks like you are fine with your temps. Just remember when you are running with higher RPM's your vanes on the impeller...
-
SawAddictedFarmer reacted to hacskaroly's post in the thread The "I work with dumb people" thread with Like.
I like the saying... "It's better to be silent and thought of as ignorant than to open your mouth and remove all doubt!!"
-
SawAddictedFarmer reacted to davidwyby's post in the thread Bunch of random pics of cutters with Like.
*this is for chipping thru desert dried eucalyptus
-
SawAddictedFarmer reacted to davidwyby's post in the thread Bunch of random pics of cutters with Like.
I experimented once before with Xcut/Hexa flat faced cutters but titled more vertical for durability. Need to revisit. Probably will go...
-
SawAddictedFarmer reacted to Stump Shot's post in the thread Bunch of random pics of cutters with Like.
There's been plenty enough that have accidentally put their chain on backwards to prove that theory correct.
-
SawAddictedFarmer reacted to huskihl's post in the thread Bunch of random pics of cutters with Like.
I think they can get pretty blunt/dull and still cut. Remember the knotheads in the sharpening group that were snapping the rakers off...
-
SawAddictedFarmer reacted to davidwyby's post in the thread Bunch of random pics of cutters with Like.
Let’s see some uber durable round full chisel. How blunt can you get before it doesn’t cut? Figure a powerful saw and lowering rakers to...
-
SawAddictedFarmer reacted to jacktheripper's post in the thread Bunch of random pics of cutters with Like.
This one will be fast.