qurotro's latest activity
-
Hell boys...I use a damn torch sometimes. No need to overthink it. -
It still doesn't look like much, but is certainly runs and oils well. Mark
-
The piston and cylinder are in pretty good condition but the rings were questionable so I replaced them (PN 85245). The early 82 cc...
-
Probably quicker to run the oil feed line to the carb and the fuel line to the oiler than it is to explain what the issue was. That way...
-
Had a MS170 Friday that had the fuel tank full of bar oil and bar oil tank full of fuel. Don't see why they can't make them run either way.
-
Just to update this thread, I found out that the limiter cap is on an air bleed valve, not an idle jet. That's why there's not much of...
-
Good day all. I bought a "2100/298" cylinder of the bay it showed up yesterday. As soon as it came out of the box I knew it was no a...
-
The CP55 is a fine saw when running properly. Very nice anti-vibe, just be careful with the lower mount as those could be a bit...
-
got my first rh start mcculloch today!
-
Recent donation. It was kept up pretty well, I will give it a good clean up and find a spot for it in the display. Mark
-
Need to pull this one apart tonight, has some play in the pto side,
-
Got my first 064 the other daygot it all tore down and cleaned up And gathering parts for the rebuild
-
Been a bit since I posted anything, figured this was worthy to get this thread back to the top.
-
Mark @heimannm do you have one of these I've never heard or seen one until now.
-
Meh modern gender confused synthetic...lol Old school mineral for the win 🏆
